{"id":4478,"date":"2026-10-19T10:03:31","date_gmt":"2026-10-19T02:03:31","guid":{"rendered":"https:\/\/hipadroller.com\/industrys\/pivot-door-system-weight-and-opening-guide\/"},"modified":"2026-10-19T10:03:34","modified_gmt":"2026-10-19T02:03:34","slug":"pivot-door-system-weight-and-opening-guide","status":"publish","type":"industrys","link":"https:\/\/hipadroller.com\/pt\/industrys\/pivot-door-system-weight-and-opening-guide\/","title":{"rendered":"Pivot Door System: Weight and Opening Guide"},"content":{"rendered":"

Allen Wang | CEO and Founder, HIPAD<\/strong>
Updated: October 19, 2026<\/strong><\/p>\n

A pivot door system needs approval as an installed assembly, not by a headline weight alone. HIPAD’s supplied Door Controls reference lists pivot systems up to 200 kg with a 180-degree opening reference. Those figures help shortlist the family; they do not establish the rating, floor anchorage or achievable opening of every model in every entrance.<\/p>\n

\"Pivot
Request the exact pivot model and installation drawing before applying a family-level range.<\/figcaption><\/figure>\n

Linhas de controlo de portas publicadas<\/h2>\n

A documenta\u00e7\u00e3o de refer\u00eancia de produtos Door Controls da HIPAD inclui as seguintes descri\u00e7\u00f5es de fam\u00edlias. Trata-se de refer\u00eancias para sele\u00e7\u00e3o, n\u00e3o substituindo relat\u00f3rios de ensaio espec\u00edficos do modelo ou aprova\u00e7\u00f5es estruturais.<\/p>\n\n\n\n\n\n\n\n\n
Control family<\/th>\nPublished door-weight reference<\/th>\nRefer\u00eancia de abertura publicada<\/th>\nPergunta principal antes da sele\u00e7\u00e3o<\/th>\n<\/tr>\n<\/thead>\n
Pivot system<\/td>\nAt\u00e9 200 kg<\/td>\n180 graus<\/td>\nCan the chosen pivot, door and floor\/head structure work together?<\/td>\n<\/tr>\n
Floor spring<\/td>\nAt\u00e9 150 kg<\/td>\n180 graus<\/td>\nIs closing control required, and is the floor condition suitable?<\/td>\n<\/tr>\n
Mola de porta<\/td>\n60-120 kg<\/td>\n120-180 degrees<\/td>\nA mola selecionada \u00e9 adequada \u00e0 porta e ao regime de fecho?<\/td>\n<\/tr>\n
Stainless-steel patch fitting<\/td>\nNo numerical range stated<\/td>\nNo angle stated<\/td>\nIs the glass and fitting interface specified for the assembly?<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

These are different functions and are not interchangeable solely because their published angles overlap. A pivot defines the rotation support; closing behavior and glass attachment may require other compatible components. Review the Door Controls range<\/a> as a system, then request the exact drawings and evidence for each selected component.<\/p>\n

Pivot door system load: what \u201cup to 200 kg\u201d leaves unanswered<\/h2>\n

A massa da porta \u00e9 apenas um dos par\u00e2metros. Forne\u00e7a ao fornecedor a altura, largura, espessura, material, disposi\u00e7\u00e3o dos vidros e o recuo do piv\u00f4 em rela\u00e7\u00e3o \u00e0 borda da porta. Uma folha larga altera a geometria operacional e a carga nos seus suportes, mesmo quando a sua massa permanece inalterada. Solicite os limites declarados de dimens\u00f5es da porta, as fixa\u00e7\u00f5es e as condi\u00e7\u00f5es de instala\u00e7\u00e3o do modelo proposto, em vez de considerar o valor m\u00e1ximo da fam\u00edlia como uma aprova\u00e7\u00e3o para uma entrada espec\u00edfica.<\/p>\n

Identifique tamb\u00e9m se o sistema se destina a uma folha \u00fanica, a uma entrada dupla ou a uma substitui\u00e7\u00e3o\/retrofit. Num retrofit, infraestruturas embutidas, pavimentos acabados e rebaixos existentes podem condicionar a localiza\u00e7\u00e3o do piv\u00f4. N\u00e3o escolha um piv\u00f4 unicamente porque outra obra utilizou uma porta de peso semelhante; essa compara\u00e7\u00e3o omite a estrutura do pavimento e da cabeceira.<\/p>\n

\"Floor
A mola de piso \u00e9 uma fam\u00edlia de controlo separada; compare a sua fun\u00e7\u00e3o e condi\u00e7\u00f5es de instala\u00e7\u00e3o.<\/figcaption><\/figure>\n

Opening angle must be measured in the entrance<\/h2>\n

The 180-degree pivot reference does not promise that every installed leaf reaches a full half-turn. Wall returns, adjacent glazing, handles, stops, floor finishes and the selected pivot offset can reduce the usable angle. Confirm the required clear opening in the door schedule, then test a production-intent assembly through its full travel. Check sweep clearance, edge contact and hardware interference at intermediate positions, not only when fully open.<\/p>\n

If the project needs self-closing or controlled closing, define that requirement separately. A door-closer selection guide<\/a> explains why weight and angle references have to be checked against the real opening geometry. Do not infer that every pivot system includes a closer.<\/p>\n

Apoio no piso, fixa\u00e7\u00e3o e interface com o vidro<\/h2>\n

Ask the project engineer to identify the supporting substrate, finished floor build-up, recess depth, waterproofing and available fixing zones. The supplied HIPAD reference does not give one universal anchor design or floor-load calculation. Any fixing schedule must therefore be approved for the actual structure and the quoted model. Keep the upper support and door-leaf preparation in the same drawing set so their axes can be checked together.<\/p>\n

For a glass entrance, verify the glass preparation and fitting interface against the chosen patch fitting. HIPAD’s supplied catalog lists stainless-steel patch fittings but does not publish a single numerical capacity for that family. A picture of a fitting cannot establish glass thickness, hole geometry or compatibility; request the model drawing and required glass specification.<\/p>\n

\"Stainless
A prepara\u00e7\u00e3o do vidro e a geometria das ferragens exigem a especifica\u00e7\u00e3o exata da pe\u00e7a.<\/figcaption><\/figure>\n

Five sample-approval checks for OEM buyers<\/h2>\n
    \n
  1. Send door and entrance drawings showing mass, dimensions, pivot offset, floor and head sections, opening direction and target clear opening.<\/li>\n
  2. Solicite o desenho t\u00e9cnico exato do modelo do piv\u00f4, as condi\u00e7\u00f5es de aplica\u00e7\u00e3o nominais, os fixadores e eventuais relat\u00f3rios de ensaio pertinentes. Compare-os com a refer\u00eancia da fam\u00edlia em vez de copi\u00e1-la diretamente para uma ordem de compra.<\/li>\n
  3. Check floor recess, anchor zones, finished-floor height, upper support alignment and access for installation or later service.<\/li>\n
  4. Install a representative sample, measure its actual opening angle and clearances, and check whether any separate closing control or stop is required.<\/li>\n
  5. Freeze the approved drawing revision, materials, finish, inspection points and packaging before repeat production.<\/li>\n<\/ol>\n

    HIPAD describes OEM\/ODM support for custom drawings, structure and packaging. For a broader supplier review, use the lista de verifica\u00e7\u00e3o para fabricantes de ferragens para portas<\/a>. O material original n\u00e3o divulga pre\u00e7os de sistemas de piv\u00f4 nem n\u00fameros de certificados ao n\u00edvel do produto; solicite um or\u00e7amento e a documenta\u00e7\u00e3o referente ao modelo definido.<\/p>\n

    Perguntas frequentes<\/h2>\n

    Does \u201cup to 200 kg\u201d mean any 200 kg door can use the system?<\/h3>\n

    No. It is a published family reference. The chosen model must be checked against door geometry, fixing conditions and the supplier’s model-level limits.<\/p>\n

    Does the pivot system automatically close the door?<\/h3>\n

    Do not assume so. Specify the required closing behavior and confirm the compatible control components for the offered assembly.<\/p>\n

    Can the door always open 180 degrees?<\/h3>\n

    No. The installed angle depends on pivot offset, adjacent construction and hardware. Verify it on a representative entrance.<\/p>\n

    What if the finished floor has limited depth?<\/h3>\n

    Include the floor section in the inquiry. The proposed model, recess and fixing scheme need approval for the actual construction before ordering.<\/p>\n

    To plan an OEM sample or request a model-specific quote, contact HIPAD<\/a> with the door schedule, floor\/head details and opening requirement. If the entrance uses heavy hinges elsewhere, the hinge guide<\/a> helps keep those separate hardware decisions explicit.<\/p>\n

    About the author:<\/strong> Allen Wang is CEO and Founder of HIPAD. His supplied background describes manufacturing experience beginning in Qingdao bearing production in 1998 and work with international door and window hardware buyers. This guide uses HIPAD’s Door Controls family reference; a project specification still needs model-level documents and installation review.<\/p>","protected":false},"excerpt":{"rendered":"

    Specify a pivot door system using HIPAD’s published up-to-200 kg and 180-degree references, then confirm door geometry, floor support and model-level tests.<\/p>","protected":false},"featured_media":1660,"comment_status":"open","ping_status":"closed","template":"","class_list":["post-4478","industrys","type-industrys","status-publish","has-post-thumbnail","hentry"],"acf":[],"_links":{"self":[{"href":"https:\/\/hipadroller.com\/pt\/wp-json\/wp\/v2\/industrys\/4478","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/hipadroller.com\/pt\/wp-json\/wp\/v2\/industrys"}],"about":[{"href":"https:\/\/hipadroller.com\/pt\/wp-json\/wp\/v2\/types\/industrys"}],"replies":[{"embeddable":true,"href":"https:\/\/hipadroller.com\/pt\/wp-json\/wp\/v2\/comments?post=4478"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/hipadroller.com\/pt\/wp-json\/wp\/v2\/media\/1660"}],"wp:attachment":[{"href":"https:\/\/hipadroller.com\/pt\/wp-json\/wp\/v2\/media?parent=4478"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}