{"id":4478,"date":"2026-10-19T10:03:31","date_gmt":"2026-10-19T02:03:31","guid":{"rendered":"https:\/\/hipadroller.com\/industrys\/pivot-door-system-weight-and-opening-guide\/"},"modified":"2026-10-19T10:03:34","modified_gmt":"2026-10-19T02:03:34","slug":"pivot-door-system-weight-and-opening-guide","status":"publish","type":"industrys","link":"https:\/\/hipadroller.com\/ru\/industrys\/pivot-door-system-weight-and-opening-guide\/","title":{"rendered":"Pivot Door System: Weight and Opening Guide"},"content":{"rendered":"

Allen Wang | CEO and Founder, HIPAD<\/strong>
Updated: October 19, 2026<\/strong><\/p>\n

A pivot door system needs approval as an installed assembly, not by a headline weight alone. HIPAD’s supplied Door Controls reference lists pivot systems up to 200 kg with a 180-degree opening reference. Those figures help shortlist the family; they do not establish the rating, floor anchorage or achievable opening of every model in every entrance.<\/p>\n

\"Pivot
Request the exact pivot model and installation drawing before applying a family-level range.<\/figcaption><\/figure>\n

Published door-control ranges<\/h2>\n

\u0421\u043f\u0440\u0430\u0432\u043e\u0447\u043d\u0438\u043a \u043f\u043e \u0434\u0432\u0435\u0440\u043d\u044b\u043c \u0434\u043e\u0432\u043e\u0434\u0447\u0438\u043a\u0430\u043c HIPAD Door Controls \u0432\u043a\u043b\u044e\u0447\u0430\u0435\u0442 \u0441\u043b\u0435\u0434\u0443\u044e\u0449\u0438\u0435 \u043e\u043f\u0438\u0441\u0430\u043d\u0438\u044f \u043b\u0438\u043d\u0435\u0435\u043a. \u041e\u043d\u0438 \u0441\u043b\u0443\u0436\u0430\u0442 \u043e\u0440\u0438\u0435\u043d\u0442\u0438\u0440\u043e\u043c \u043f\u0440\u0438 \u0432\u044b\u0431\u043e\u0440\u0435 \u0438 \u043d\u0435 \u0437\u0430\u043c\u0435\u043d\u044f\u044e\u0442 \u043f\u0440\u043e\u0442\u043e\u043a\u043e\u043b\u044b \u0438\u0441\u043f\u044b\u0442\u0430\u043d\u0438\u0439 \u043a\u043e\u043d\u043a\u0440\u0435\u0442\u043d\u044b\u0445 \u043c\u043e\u0434\u0435\u043b\u0435\u0439 \u0438\u043b\u0438 \u0441\u043e\u0433\u043b\u0430\u0441\u043e\u0432\u0430\u043d\u0438\u0435 \u043f\u0440\u043e\u0435\u043a\u0442\u043d\u044b\u0445 \u0440\u0435\u0448\u0435\u043d\u0438\u0439.<\/p>\n\n\n\n\n\n\n\n\n
Control family<\/th>\nPublished door-weight reference<\/th>\nPublished opening reference<\/th>\nPrimary question before selection<\/th>\n<\/tr>\n<\/thead>\n
Pivot system<\/td>\n\u0414\u043e 200 \u043a\u0433<\/td>\n180 degrees<\/td>\n\u0421\u043e\u0432\u043c\u0435\u0441\u0442\u0438\u043c\u044b \u043b\u0438 \u0432\u044b\u0431\u0440\u0430\u043d\u043d\u0430\u044f \u043f\u043e\u0432\u043e\u0440\u043e\u0442\u043d\u0430\u044f \u043e\u043f\u043e\u0440\u0430, \u0434\u0432\u0435\u0440\u044c \u0438 \u043a\u043e\u043d\u0441\u0442\u0440\u0443\u043a\u0446\u0438\u044f \u043f\u043e\u043b\u0430\/\u043f\u0440\u0438\u0442\u043e\u043b\u043e\u043a\u0438?<\/td>\n<\/tr>\n
\u041d\u0430\u043f\u043e\u043b\u044c\u043d\u044b\u0439 \u0434\u043e\u0432\u043e\u0434\u0447\u0438\u043a<\/td>\n\u0414\u043e 150 \u043a\u0433<\/td>\n180 degrees<\/td>\nIs closing control required, and is the floor condition suitable?<\/td>\n<\/tr>\n
Door closer<\/td>\n60-120 kg<\/td>\n120-180 degrees<\/td>\nDoes the selected closer match the door and closing duty?<\/td>\n<\/tr>\n
Stainless-steel patch fitting<\/td>\n\u0427\u0438\u0441\u043b\u043e\u0432\u043e\u0439 \u0434\u0438\u0430\u043f\u0430\u0437\u043e\u043d \u043d\u0435 \u0443\u043a\u0430\u0437\u0430\u043d<\/td>\nNo angle stated<\/td>\nIs the glass and fitting interface specified for the assembly?<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

These are different functions and are not interchangeable solely because their published angles overlap. A pivot defines the rotation support; closing behavior and glass attachment may require other compatible components. Review the Door Controls range<\/a> as a system, then request the exact drawings and evidence for each selected component.<\/p>\n

Pivot door system load: what \u201cup to 200 kg\u201d leaves unanswered<\/h2>\n

Door mass is only one input. Give the supplier the door height, width, thickness, material, glazing arrangement and the pivot’s offset from the door edge. A wide leaf changes the operating geometry and loading at its supports even when its mass is unchanged. Ask for the proposed model’s declared door-size limits, fixings and installation conditions instead of treating the family maximum as an approval for a particular entrance.<\/p>\n

Also identify whether the system is intended for a single leaf, a paired entrance or a replacement retrofit. In a retrofit, concealed services, finished flooring and existing recesses may constrain the pivot location. Do not choose a pivot solely because another site used a door of similar weight; that comparison omits the floor and head construction.<\/p>\n

\"Floor
A floor spring is a separate control family; compare its function and installation conditions.<\/figcaption><\/figure>\n

Opening angle must be measured in the entrance<\/h2>\n

The 180-degree pivot reference does not promise that every installed leaf reaches a full half-turn. Wall returns, adjacent glazing, handles, stops, floor finishes and the selected pivot offset can reduce the usable angle. Confirm the required clear opening in the door schedule, then test a production-intent assembly through its full travel. Check sweep clearance, edge contact and hardware interference at intermediate positions, not only when fully open.<\/p>\n

If the project needs self-closing or controlled closing, define that requirement separately. A door-closer selection guide<\/a> explains why weight and angle references have to be checked against the real opening geometry. Do not infer that every pivot system includes a closer.<\/p>\n

Floor support, fixing and glass interface<\/h2>\n

Ask the project engineer to identify the supporting substrate, finished floor build-up, recess depth, waterproofing and available fixing zones. The supplied HIPAD reference does not give one universal anchor design or floor-load calculation. Any fixing schedule must therefore be approved for the actual structure and the quoted model. Keep the upper support and door-leaf preparation in the same drawing set so their axes can be checked together.<\/p>\n

For a glass entrance, verify the glass preparation and fitting interface against the chosen patch fitting. HIPAD’s supplied catalog lists stainless-steel patch fittings but does not publish a single numerical capacity for that family. A picture of a fitting cannot establish glass thickness, hole geometry or compatibility; request the model drawing and required glass specification.<\/p>\n

\"Stainless
\u0414\u043b\u044f \u043f\u043e\u0434\u0433\u043e\u0442\u043e\u0432\u043a\u0438 \u0441\u0442\u0435\u043a\u043b\u0430 \u0438 \u0433\u0435\u043e\u043c\u0435\u0442\u0440\u0438\u0438 \u0444\u0443\u0440\u043d\u0438\u0442\u0443\u0440\u044b \u0442\u0440\u0435\u0431\u0443\u0435\u0442\u0441\u044f \u0442\u043e\u0447\u043d\u0430\u044f \u0441\u043f\u0435\u0446\u0438\u0444\u0438\u043a\u0430\u0446\u0438\u044f \u0434\u0435\u0442\u0430\u043b\u0438.<\/figcaption><\/figure>\n

Five sample-approval checks for OEM buyers<\/h2>\n
    \n
  1. Send door and entrance drawings showing mass, dimensions, pivot offset, floor and head sections, opening direction and target clear opening.<\/li>\n
  2. Request the exact pivot model drawing, rated application conditions, fasteners and any relevant test evidence. Compare them with the family reference rather than copying it into a purchase order.<\/li>\n
  3. Check floor recess, anchor zones, finished-floor height, upper support alignment and access for installation or later service.<\/li>\n
  4. Install a representative sample, measure its actual opening angle and clearances, and check whether any separate closing control or stop is required.<\/li>\n
  5. Freeze the approved drawing revision, materials, finish, inspection points and packaging before repeat production.<\/li>\n<\/ol>\n

    HIPAD describes OEM\/ODM support for custom drawings, structure and packaging. For a broader supplier review, use the door hardware manufacturer checklist<\/a>. The source material does not disclose pivot-system prices or product-level certificate numbers; request a quotation and documents for the defined model.<\/p>\n

    \u0427\u0430\u0441\u0442\u043e \u0437\u0430\u0434\u0430\u0432\u0430\u0435\u043c\u044b\u0435 \u0432\u043e\u043f\u0440\u043e\u0441\u044b<\/h2>\n

    Does \u201cup to 200 kg\u201d mean any 200 kg door can use the system?<\/h3>\n

    No. It is a published family reference. The chosen model must be checked against door geometry, fixing conditions and the supplier’s model-level limits.<\/p>\n

    Does the pivot system automatically close the door?<\/h3>\n

    Do not assume so. Specify the required closing behavior and confirm the compatible control components for the offered assembly.<\/p>\n

    Can the door always open 180 degrees?<\/h3>\n

    No. The installed angle depends on pivot offset, adjacent construction and hardware. Verify it on a representative entrance.<\/p>\n

    What if the finished floor has limited depth?<\/h3>\n

    \u041f\u0440\u0438\u043b\u043e\u0436\u0438\u0442\u0435 \u043a \u0437\u0430\u043f\u0440\u043e\u0441\u0443 \u0440\u0430\u0437\u0440\u0435\u0437 \u043f\u043e\u043b\u0430. \u041f\u0440\u0435\u0434\u043b\u0430\u0433\u0430\u0435\u043c\u0430\u044f \u043c\u043e\u0434\u0435\u043b\u044c, \u0441\u0445\u0435\u043c\u0430 \u0443\u0433\u043b\u0443\u0431\u043b\u0435\u043d\u0438\u044f \u0438 \u043a\u0440\u0435\u043f\u043b\u0435\u043d\u0438\u044f \u0434\u043e\u043b\u0436\u043d\u044b \u0431\u044b\u0442\u044c \u0441\u043e\u0433\u043b\u0430\u0441\u043e\u0432\u0430\u043d\u044b \u0434\u043b\u044f \u0440\u0435\u0430\u043b\u044c\u043d\u043e\u0439 \u043a\u043e\u043d\u0441\u0442\u0440\u0443\u043a\u0446\u0438\u0438 \u0434\u043e \u043e\u0444\u043e\u0440\u043c\u043b\u0435\u043d\u0438\u044f \u0437\u0430\u043a\u0430\u0437\u0430.<\/p>\n

    \u0427\u0442\u043e\u0431\u044b \u0437\u0430\u043f\u043b\u0430\u043d\u0438\u0440\u043e\u0432\u0430\u0442\u044c \u0438\u0437\u0433\u043e\u0442\u043e\u0432\u043b\u0435\u043d\u0438\u0435 OEM-\u043e\u0431\u0440\u0430\u0437\u0446\u0430 \u0438\u043b\u0438 \u0437\u0430\u043f\u0440\u043e\u0441\u0438\u0442\u044c \u0440\u0430\u0441\u0447\u0435\u0442 \u0441\u0442\u043e\u0438\u043c\u043e\u0441\u0442\u0438 \u043a\u043e\u043d\u043a\u0440\u0435\u0442\u043d\u043e\u0439 \u043c\u043e\u0434\u0435\u043b\u0438, contact HIPAD<\/a> with the door schedule, floor\/head details and opening requirement. If the entrance uses heavy hinges elsewhere, the hinge guide<\/a> helps keep those separate hardware decisions explicit.<\/p>\n

    \u041e\u0431 \u0430\u0432\u0442\u043e\u0440\u0435:<\/strong> Allen Wang is CEO and Founder of HIPAD. His supplied background describes manufacturing experience beginning in Qingdao bearing production in 1998 and work with international door and window hardware buyers. This guide uses HIPAD’s Door Controls family reference; a project specification still needs model-level documents and installation review.<\/p>","protected":false},"excerpt":{"rendered":"

    Specify a pivot door system using HIPAD’s published up-to-200 kg and 180-degree references, then confirm door geometry, floor support and model-level tests.<\/p>","protected":false},"featured_media":1660,"comment_status":"open","ping_status":"closed","template":"","class_list":["post-4478","industrys","type-industrys","status-publish","has-post-thumbnail","hentry"],"acf":[],"_links":{"self":[{"href":"https:\/\/hipadroller.com\/ru\/wp-json\/wp\/v2\/industrys\/4478","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/hipadroller.com\/ru\/wp-json\/wp\/v2\/industrys"}],"about":[{"href":"https:\/\/hipadroller.com\/ru\/wp-json\/wp\/v2\/types\/industrys"}],"replies":[{"embeddable":true,"href":"https:\/\/hipadroller.com\/ru\/wp-json\/wp\/v2\/comments?post=4478"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/hipadroller.com\/ru\/wp-json\/wp\/v2\/media\/1660"}],"wp:attachment":[{"href":"https:\/\/hipadroller.com\/ru\/wp-json\/wp\/v2\/media?parent=4478"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}