21
2026.09

Manilla de aluminio para puerta con cerradura: Guía de especificaciones B2B

15:24

Manilla de aluminio para puerta con cerradura: Guía de especificaciones B2B

Allen Wang | CEO y fundador de HIPAD
Updated: September 21, 2026

An aluminum door handle with lock must fit the finished door, lock body, spindle, cylinder and mounting pattern as one system. B2B approval should use a production-intent door sample rather than relying on appearance or a handle drawing alone.

Manija de puerta de aluminio con componentes de cerradura para selección OEM
Approve the handle, lock interface and fixings as one set.

Specification checklist

Artículo Published HIPAD reference Buyer confirmation
Grosor de la puerta Manillas de puerta de aluminio con cerradura para puertas de 35-60 mm Finished leaf, cladding and production tolerance
Lock interface Sliding-door, mortise and related lock configurations Lock body, backset, follower and cylinder position
Spindle Específico de la configuración Section, length, engagement and retention
Mounting Drawing-based structure adjustment Distancia entre centros de fijación, tipo de tornillo, cobertura de la placa y holgura
Sentido de apertura Application-dependent Left/right door, opening direction and lever orientation
terminar Custom finish support Color reference, texture, substrate and exposure

HIPAD’s source library lists aluminum door handles with locks for 35-60 mm doors. The wider Custom Handle Sets family covers window handles, flush handles, interior levers and entry-door mortise sets, with published door or window thickness ranges of 30-80 mm depending on configuration.

Match the handle to the lock body

Start with the lock drawing. Confirm the backset, follower size, spindle section, cylinder center, fixing centers and required plate coverage. Then check that the lever clears the frame, seal and adjacent hardware throughout its movement.

Compared with generic replacement handles, an OEM set must control both visible and concealed interfaces. A matching finish does not prove that the spindle, follower or through-fixings will fit the selected lock body.

Manilla de aluminio para puerta con cerradura y referencia para caja de embutir
Verifique las posiciones del cuadradillo, el cilindro y las fijaciones con respecto al plano de la cerradura.

Six checks before sample approval

  1. Measure the finished door. Include skins, inserts, cladding and tolerance.
  2. Freeze the lock body. Record the model, backset, follower, cylinder and fixing layout.
  3. Confirm handing. State opening direction, handle orientation and any reversible parts.
  4. Review the drawing. Mark spindle engagement, fastener length, projection and critical clearances.
  5. Install the complete sample. Compruebe el retorno de la manilla, el enganche del pestillo o gancho, el funcionamiento de la llave y la alineación.
  6. Retain approval evidence. Keep the signed drawing, sample, finish standard, packaging and inspection criteria.

Common error: treating door thickness as the only dimension

Door thickness determines spindle and fastener requirements, but it does not define the complete fit. The frame clearance, lock backset, cylinder location, plate width and fixing centers can still make a nominally suitable handle unusable. Edge cases include clad doors and reinforced profiles where the visible thickness differs from the fixing stack.

Manilla de palanca de aluminio con función de bloqueo y comprobación de mano de apertura
Test lever return, handing and frame clearance on the intended door.

Material, finish and quotation evidence

The supplied reference identifies aluminum and zinc-alloy handle configurations plus steel/zinc-alloy and brass/steel lock options across related families. It does not disclose a universal product certificate number, corrosion rating, price or MOQ. Request the exact material, coating system, color tolerance, exposure requirement and model-specific test evidence.

HIPAD describes OEM/ODM support for dimensions, structures, logo engraving, private molds and customized packaging. Tooling, MOQ, price and lead time require a project quotation.

Preguntas frecuentes

What door thickness is covered by the published reference?

The source library lists aluminum door handles with locks for 35-60 mm doors. Confirm the exact handle and lock configuration before ordering.

Can one handle work with any lock body?

No. Backset, follower, spindle, cylinder and fixing centers must match the selected lock body.

How should handing be specified?

Provide the viewing side, hinge side, opening direction and required lever orientation. Do not rely only on the labels left and right.

Can the finish and packaging be customized?

HIPAD describes custom finish, logo and packaging support. Approval samples, quantity and project requirements determine feasibility and quotation.

Prepare the RFQ

Send the finished door thickness, profile drawing, lock body, backset, spindle, cylinder, handing, fixing centers, finish, quantity, packaging and inspection requirements. Review the custom handle sets range, el door and window lock range, el mortise handle set guide, el custom door hardware guide y contacte con HIPAD para una confirmación específica del modelo.

Acerca del autor

Allen Wang is CEO and Founder of HIPAD. He began as a technical engineer in 1998 and focuses on manufacturing, tooling, quality, OEM/ODM development and architectural hardware supply.

Productos

Blogs relacionados

Contáctenos

    Solicitar presupuesto

      Responderemos en un plazo de 24 horas. Para solicitudes urgentes, contacte con nosotros por WhatsApp/WeChat en el +86 137 9191 8989 o llame directamente al mismo número.

      *Respetamos la confidencialidad de sus datos y protegemos toda la información facilitada.

      Solo utilizaremos sus datos para responder a su consulta y nunca enviaremos correos electrónicos no solicitados ni mensajes promocionales.