Glass Railing Hardware Manufacturer & Supplier · China

Glass Railing Hardware: Systems, Spigots, Posts, Clamps and Handrail Fittings – A Buyer's Guide from the Factory

Glass railing hardware is the stainless steel that holds a glass balustrade in place: spigots or posts at the base, glass clamps or standoffs on the panel edge, and a handrail or top rail with its brackets and fittings. HIPAD manufactures this hardware in SS304 and SS316 for 8–15 mm tempered and laminated glass, for balconies, stairs, pool fences and commercial atriums. Distributors, railing fabricators and contractors in 60+ countries buy complete systems or single components from our factory.

Spigot · post · side-mount systems
SS304 / SS316
8–15 mm glass
Brushed · mirror · black · gold
Project & OEM supply
Certifié ISO 9001

Request Railing Catalog & Price Compare Railing Systems

HIPAD stainless steel glass railing hardware: posts, glass clamps and handrail fittings

What Is Glass Railing Hardware?

A glass railing, also called a glass balustrade, glass guardrail ou barandilla de vidrio, is a safety barrier made of toughened glass panels. The glass does the guarding; the hardware decides how the glass is fixed, how much it can carry and how long it lasts outdoors.

There are three main ways to fix the glass. In a frameless system the panels stand in spigots or a base channel with no posts. In a post-and-clamp system, stainless steel posts carry the load and glass clamps hold the panels between them. In a side-mounted system the glass or posts are fixed to the face of the slab edge, which keeps the floor clear. A handrail or top rail can be added to any of them, and many building codes require one.

HIPAD Railing Hardware: Key Facts

Fabricant : HIPAD, Qingdao, China; founded 2000, stainless railing hardware since 2020
Systèmes : spigot (frameless), post-and-clamp, side-mounted, handrail systems
Components: glass spigots, railing posts, glass clamps, standoffs, handrail brackets, elbows, joints, end caps
Matériau : stainless steel 304 and 316
Verre : 8–12 mm for post systems, 10–12 mm for side-mount and standard spigots, 12–15 mm for heavy-duty spigots
Typical heights: 900–1100 mm guard height; spigots 160–220 mm tall
Commande : échantillons : 5 à 7 jours · production : 20 à 25 jours ouvrés · FOB Qingdao

Railing systems & components

HIPAD Glass Railing Systems and Components

Each range below has its own page with models and specifications. Choose the system first, then the components that go with it.

Stainless steel glass railing system with post, glass panel and handrail

Système

Stainless Steel Glass Railing Systems

Complete balcony and stair systems with posts, clamps and handrails in SS304 or SS316.

Stainless steel post glass railing system

Posts + clamps

Post Glass Railing Systems

Posts carry the load and clamps hold the glass between them. The most forgiving system on site.

Slab edge

Side-Mounted Railing Systems

Fixed to the face of the slab or stair stringer, keeping the full floor width clear.

Frameless

Glass Spigots

Square and round spigots for frameless balustrades and pool fences, standard and heavy-duty.

Stainless steel glass railing post with base plate

Posts

Railing & Handrail Posts

Square, round, side-mount and stair posts, pre-drilled for glass clamps and handrail brackets.

Adjustable stainless steel handrail connector

Fittings

Handrail Fittings & Connectors

Elbows, adjustable joints, T and cross connectors, wall brackets and end caps for round and square tube.

Stainless steel stair handrail with glass balustrade

Mains courantes

Stainless Steel Handrails

Stair, balcony and walkway handrails and top rails in tube and slotted profiles.

Clamps

Pinces pour garde-corps en verre

D-clamps, square clamps and heavy-duty clamps for glass-to-post and glass-to-wall fixing.

From our catalog

Railing Hardware from Our Factory

A selection of HIPAD posts, spigots and handrail fittings. Every part can be made in your finish, size and packaging. Ask for the full catalog with drawings.

Matte black square stainless steel railing post — Square post, matte black

Gold finish square glass spigot — Square spigot, gold

Stainless steel handrail bracket — Handrail bracket

Stainless steel glass standoff fitting — Glass standoff fitting

HIPAD HDG234 wall mounted handrail bracket — HDG234 · wall bracket

HIPAD HDG238 90 degree handrail elbow — HDG238 · 90° elbow

HIPAD HDG236 adjustable handrail joint — HDG236 · adjustable joint

HIPAD HDG89 round glass railing clamp — HDG89 · round clamp

Step 1 · System

Types of Glass Railing Systems Compared

Réponse rapide : choose spigots for the cleanest frameless look on balconies and pool fences, posts and clamps for the easiest installation and lower glass cost, and side-mounted fixing when the floor must stay clear or the slab edge is the only solid fixing point.

Green = glass, dark grey = stainless steel, hatched = floor slab. Not to scale.

Système	Look	Verre	Install	Idéal pour	HIPAD page
Spigot (frameless)	Cleanest, almost invisible	Thicker toughened or laminated, 10–15 mm	Spigots core-drilled or plate-fixed; glass leveled in the spigot	Balconies with a view, pool fences, terraces	Pinces à verre
Post + clamp	Posts visible, light frame	8–12 mm toughened	Easiest; posts take up site tolerances	Stairs, balconies, corridors, budget projects	Post systems
Side-mounted	Floating glass, clear floor	10–12 mm toughened or laminated	Fixed into the slab edge; needs a sound edge	Stairs, mezzanines, narrow balconies	Side-mounted systems
Post or glass with top rail	Continuous handrail line	8-12 mm	Rail fixed to posts or clamped to the glass top	Public buildings, stairs, where a handrail is required	Mains courantes

Step 2 · Components

Glass Railing Components and What Each One Does

Composant	Job	Typical HIPAD range	What to specify
Glass spigot	Holds a frameless panel at the base	Square and round, 160–220 mm tall, glass 10–12 mm; heavy-duty 12–15 mm	Glass thickness, base plate or core-drilled, finish
Railing post	Carries the barrier load to the floor	Square, round, side-mount and stair posts, 850–1200 mm	Height, wall thickness, base plate, clamp holes
Glass clamp	Holds the glass edge to a post or wall	D-clamps, square and round clamps for 8–12 mm glass	Flat or curved back (to match the post), glass thickness
Standoff (point fixing)	Bolts the glass to a slab edge or wall	Round standoffs in several diameters and lengths	Glass hole size, standoff length, substrate
Handrail / top rail	Gives a grip line and ties panels together	Round and square tube, slotted cap rail	Profile, diameter, glass thickness for slotted rail
Handrail fittings	Join and fix the handrail	Elbows, adjustable joints, T and cross joints, wall brackets, end caps	Tube size, angle, wall or post fixing
Gaskets and inserts	Protect the glass and stop it slipping	Rubber and PVC gaskets sized to the glass	Glass thickness, including laminated build-ups

Step 3 · Height and safety

Glass Railing Height and Load Requirements

Guard height, load and glass type are set by local building codes, and an engineer should confirm the design for each project. The table shows common minimum heights that buyers ask us about; always check the current code where the railing will be installed.

Market	Common minimum guard height
USA (IBC / IRC)	42 in (1067 mm) for commercial guards; 36 in (914 mm) in most homes
UK (Approved Document K)	900 mm for stairs and internal landings; 1100 mm for external balconies and edges
Australia (NCC)	1000 mm for balustrades; pool fences usually 1200 mm (AS 1926.1)
EU, Latin America, Middle East	Set nationally; typically 900–1100 mm

Rules that shape the hardware

Glass type: use toughened (tempered) safety glass. Many codes require laminated glass, or a handrail that links the panels, for frameless balustrades so the barrier stays in place if one pane breaks.
Loads: codes set a line load on the top of the barrier and a point load on the infill. Spigot and post size, spacing and fixing must be designed for them.
Spigot layout: most frameless panels use two spigots per panel, set in from each edge; wide or tall panels need three. The engineer fixes the final positions.
Gaps: openings between panels and at the floor are limited by code, often to 100 mm or a 4-inch sphere in the USA.
Glass weight: about 2.5 kg per m² per millimeter. A 1000 × 1100 mm panel in 12 mm glass weighs about 33 kg.

Send your drawing, glass build-up and target code. We match spigot, post and clamp sizes to it and supply test reports per model.

Step 4 · Material and finish

304 or 316 Stainless Steel for Railings?

Réponse rapide : use 316 outdoors near the sea, around pools and in humid tropical climates; 304 is fine indoors and in dry inland areas. Chlorides from sea air and pool water attack 304 and cause brown "tea staining".

Location	Grade	Finish tip
Indoor stairs, atriums, offices	304	Brushed or mirror
Outdoor, inland city	304 or 316	Brushed, cleaned regularly
Coastal, within sight of the sea	316	Mirror or fine brushed resists staining better
Pool fences and spa areas	316	Rinse off pool water and salt regularly
Tropical, high humidity	316	Avoid rough finishes that trap dirt

Finitions

Brushed (satin) Mirror polished Noir mat Gold

Spigots, posts, clamps and handrail fittings are finished to match, so a project gets one color from one factory. Other PVD colors are available for private-label ranges.

Stainless steel railing posts in brushed, black and gold finishes

Recommended Hardware by Application

Demande	Recommended system	Grade	Verre	Notes
Residential balcony	Spigot or post + clamp	304 inland, 316 coastal	10-12 mm	Check the external balcony height rule
Indoor staircase	Side-mounted or post + clamp with handrail	304	8-12 mm	Handrail usually required on stairs
Pool fence	Spigot, frameless	316	12 mm	Pool barrier height, gaps and gate rules apply
Terrace and roof deck	Spigot or post system	316	12 mm or laminated	Allow for wind load
Mall atrium and public walkway	Post or side-mounted with top rail	304 / 316	12 mm laminated	Higher crowd loads

Project references

Glass Railing Projects Using HIPAD Hardware

Client names are kept confidential. Each project page lists the application and the HIPAD products used.

Resort pool fence · Bali, Indonesia

Frameless glass pool fence with floor-mounted fittings and stainless glass clamps, chosen for humidity and coastal air.

Apartment balconies · Milan, Italy

Frameless balcony railings with glass clamps and stainless handrails for a modern facade.

Shopping mall guardrails · São Paulo, Brazil

Indoor balcony guardrails for high-traffic areas, with glass clamps, handrail brackets and railing hardware.

High-rise balconies · Bangkok, Thailand

Frameless balcony railings with stainless clamps and handrail brackets for a tropical climate.

Coastal villa · Sydney, Australia

Corrosion-resistant clamps and handrail brackets for balconies and terraces exposed to sea air.

Residential staircase · Munich, Germany

Minimal staircase railing with precision glass clamps, handrails and mounting brackets.

Présentation de l'installation

Confirm the code, glass build-up and engineer's layout, then order glass with holes or notches cut avant le revenu.
Set out spigot or post positions with a laser line; check the slab for reinforcement, edges and level.
Fix spigots or posts with the specified anchors or core-drill and grout; for side mounting, fix into sound concrete or steel.
Fit gaskets, set the glass on setting blocks and tighten clamps or spigot screws evenly to the given torque.
Plumb and align the panels, keeping gaps even, then fit the handrail or top rail and its fittings.
Fit cover plates and caps, clean off fingerprints and site dust, and hand over cleaning instructions.

Installation should be done by a qualified railing or glazing contractor.

Common Problems and Fixes

Problème	Corriger
Brown spots on outdoor railings	Use 316 near the sea and pools; clean with fresh water and stainless cleaner
Glass panel leans or moves	Re-torque spigot or clamp screws; check gaskets and anchors
Panels not in line	Use adjustable spigots or clamps; set out with a laser line
Chipped glass at a clamp	Always fit gaskets; never let metal touch glass
Handrail joints not flush	Use adjustable joints and elbows sized to the tube

Pourquoi acheter chez HIPAD ?

Railing Hardware Made in Our Own Factory

HIPAD is a manufacturer, not a trading middleman. We started in 2000 with bearings and precision parts, and in 2020 we added stainless steel handles, glass clamps, shower fittings and railing hardware. Tooling, molds, production, finishing checks and packing are managed under one quality system, so railing parts can be built to your drawing, grade and brand.

25+années d'activité dans le secteur de la fabrication (depuis 2000)

304 / 316stainless grades for indoor and coastal projects

2000+kits de moules pour une personnalisation rapide

60+pays desservis

Usine de matériel informatique HIPAD à Qingdao, en Chine — Usine HIPAD

Assembling stainless steel railing fittings — Railing fitting assembly

Stainless steel handrail fittings ready for inspection — Fittings inspection

Cartons de quincaillerie sur palettes prêts à être exportés — Emballage pour l'exportation

Contrôle qualité

Material verification of 304 and 316 stainless steel
Dimensional checks of spigot and clamp cavities against the glass build-up
Load-bearing checks on posts, spigots and brackets
Finish inspection for scratches, polish consistency and plating
Corrosion and finish checks for outdoor and coastal orders

HIPAD est ISO 9001 certifiés, et les produits concernés portent CE, GS et CSA C-UL certification. SGS or BV third-party inspection is available, and material certificates and test reports are provided per model on request.

OEM / ODM railing hardware

Make spigots, posts and clamps to your drawings and glass build-up
Open private molds for exclusive designs
Brushed, mirror, matte black, gold and PVD colors
Laser logo, private-label packing, même pour de petites quantités
Pack by project area or as complete railing kits

1. Drawings	Send the layout, glass build-up, code and finish
2. Échantillons	5–7 days for existing models
3. Production	20 à 25 jours ouvrés
4. Expédition	FOB Qingdao ou tout port chinois · acompte de 30 %, 70 % avant expédition

Railing guides

More Guides on Glass Railing Hardware

Glass Railing Clamp GuideSquare vs round clamps, mounting methods and QC
How to Choose a 316 Stainless Steel Glass ClampGrades, glass thickness and mounting for balustrades
Frameless Glass Pool Fence Project in BaliCorrosion, safety and design in a tropical resort
Outdoor Railing & Balustrade SolutionsWind, weather and modular installation
Complete Hardware Solutions for Your Next Railing ProjectOne source for posts, clamps and fittings
Gold Finish Railing FittingsPremium finishes for modern glass railings

Glass Railing Terms

Terme	Signification	Également appelé
Glass balustrade	Safety barrier with glass infill	Glass railing, glass guardrail, barandilla de vidrio, guarda-corpo de vidro
Spigot	Short post that clamps the base of a frameless panel	Glass spigot, pool fence spigot
Glass clamp	Fitting that holds the glass edge to a post or wall	D-clamp, glass bracket
Standoff	Bolt-through fitting that holds glass away from a surface	Point fixing, glass adapter
Side-mounted	Fixed to the face of the slab edge	Face-mounted, fascia-mounted
Top rail	Rail fixed on top of the glass or posts	Cap rail, handrail
Toughened glass	Heat-treated safety glass	Tempered glass
Laminated glass	Two or more panes bonded with an interlayer	Safety laminated glass

Glass Railing Hardware FAQ

Quelle quincaillerie est nécessaire pour un garde-corps en verre ?

Un garde-corps en verre nécessite une fixation de base (pinces à verre, poteaux ou fixations latérales), des accessoires qui maintiennent le verre (pinces à verre, entretoises ou la pince à verre elle-même), des joints pour protéger le verre, et généralement une main courante ou une lisse supérieure avec des supports, des coudes et des embouts.

Quelle est la différence entre un garde-corps en verre sur pinces à verre et sur poteaux ?

Dans un système à pinces à verre, les panneaux de verre reposent dans de courtes pinces à verre et supportent eux-mêmes la charge, ce qui donne au garde-corps un aspect sans cadre. Dans un système à poteaux, les poteaux en acier inoxydable supportent la charge et des pinces à verre maintiennent les panneaux entre eux, ce qui permet d’utiliser un verre plus fin et facilite l’installation.

Dois-je utiliser de l’acier inoxydable 304 ou 316 pour les garde-corps en verre ?

Utilisez de l’acier inoxydable 316 près de la mer, autour des piscines et dans les climats tropicaux humides, car il résiste mieux aux chlorures. Le 304 convient aux garde-corps intérieurs et aux zones sèches situées à l’intérieur des terres.

Quelle épaisseur de verre est utilisée pour les garde-corps en verre ?

Les systèmes à poteaux et pinces utilisent généralement du verre trempé de 8 à 12 mm. Les systèmes à fixation latérale et à pinces à verre standard utilisent du verre de 10 à 12 mm, tandis que les pinces à verre sans cadre renforcées acceptent du verre de 12 à 15 mm. De nombreuses réglementations exigent du verre feuilleté pour les balustrades sans cadre ; la composition finale dépend donc de la réglementation et de l'ingénieur.

Quelle doit être la hauteur d’un garde-corps en verre ?

Cela dépend de la réglementation locale. Les minima courants sont de 42 po (1 067 mm) pour les garde-corps commerciaux aux États-Unis, 1 100 mm pour les balcons extérieurs au Royaume-Uni, 1 000 mm en Australie et 1 200 mm pour les clôtures de piscine en Australie. Vérifiez toujours la réglementation en vigueur sur le lieu du projet.

Combien de pinces à verre nécessite un panneau de verre sans cadre ?

La plupart des panneaux sans cadre utilisent deux pinces à verre, positionnées à distance de chaque bord du panneau. Les panneaux plus larges ou plus hauts, ou ceux situés dans des zones à vents forts, en nécessitent trois. L’ingénieur du projet confirme la taille, le nombre et la position des pinces à verre.

HIPAD peut-il fournir un système complet de garde-corps en verre ?

Oui. HIPAD fournit des pinces à verre, poteaux, pinces à verre, entretoises, mains courantes et raccords de main courante dans des nuances et finitions assorties, emballés par zone de projet ou en kits complets. Le verre lui-même est généralement approvisionné localement par l’installateur.

Quel est le délai de livraison pour la quincaillerie de garde-corps ?

Les échantillons de modèles existants nécessitent 5 à 7 jours, et la production en série 20 à 25 jours ouvrés. Des dimensions sur mesure, des moules privés, des logos laser et un emballage sous marque privée sont disponibles, même pour de petites quantités.

HIPAD est-il un fabricant ou une société de négoce ?

HIPAD est un fabricant fondé en 2000 à Qingdao, en Chine, qui produit de la quincaillerie de garde-corps en acier inoxydable depuis 2020 avec son propre outillage, plus de 2 000 jeux de moules et un contrôle qualité interne. HIPAD est certifié ISO 9001. Qingdao Hipad International Trade Co., Ltd. assure les exportations.

Dernière mise à jour : octobre 2026 · Relu par Allen, ingénieur technique, HIPAD

Related Glass Hardware

Pinces à verre Glass standoffs and point fixings

Glass Standoffs & Point Fixings Outdoor glass railing

Solutions de garde-corps pour l'extérieur Stainless steel door handles

Poignées en acier inoxydable

Send Your Glass Railing Requirements To HIPAD

Pourquoi nous choisir ?

A hardware factory since 2000, supplying glass railing hardware to distributors, railing fabricators, contractors and developers in 60+ countries. Our commitment includes:

Certification ISO 9001 ; marquages CE, GS et CSA C-UL pour les produits concernés ; inspections SGS / BV disponibles
Spigots, posts, clamps and handrail fittings in SS304 / SS316, one finish per project
Échantillons sous 5 à 7 jours, production en série sous 20 à 25 jours ouvrés
OEM / ODM : plans, finitions, logo et emballage, même pour de petites quantités

Send your railing layout, glass build-up, code and finish. We reply within 24 hours with a hardware list and a factory price.

Demander un devis

Obtenir un devis

Nous répondons sous 24 heures. Pour toute demande urgente, contactez-nous sur WhatsApp/WeChat au +86 137 9191 8989 ou appelez directement ce même numéro.

*Nous respectons la confidentialité de vos données et protégeons toutes les informations transmises.

Nous utiliserons vos informations uniquement pour répondre à votre demande et n'enverrons jamais d'e-mails non sollicités ni de messages promotionnels.