A frameless shower door hardware kit is the full set of metal parts needed to build one glass shower: hinges, glass clamps, a handle, a support bar and seals, matched to the layout and glass thickness. HIPAD makes these kits for 8–12 mm tempered glass in one finish, packed per shower or in bulk. Distributors, shower enclosure makers, glass processors and contractors in 60+ countries buy complete kits or single components from our factory under their own brand.
A shower door hardware kit, also called a shower enclosure hardware set or shower system, brings every fitting for one frameless shower into a single order. The door hangs on shower hinges. Fixed panels are held by Glasklemmen or a U-channel. A support bar keeps tall panels rigid, and a handle plus seals finish the door.
Buying the parts as one kit means the hinge angles, clamp types, hole positions and finish all match. Glass processors can cut and drill the glass to one hardware standard, and installers get one box per bathroom. The contents change with the layout, which is why this page lists a bill of materials (BOM) for each common shower. In Spanish-speaking markets the same set is often called herrajes para mampara de baño of kit de herrajes para cancel de baño.
Every HIPAD kit is built from our own component ranges, so you can mix a standard kit with custom parts. Each part below links to its full product page with specifications.
Wall-to-glass and glass-to-glass hinges at 90°, 135° and 180°, with self-closing and long heavy-duty versions. Two hinges carry a standard door.
Wall-to-glass, glass-to-glass and floor clamps hold every fixed panel. A standard panel uses two clamps on the wall edge and two on the floor.
Back-to-back pull handles, knobs and flush pulls fixed through a hole in the door glass. Shower handles are usually 300–600 mm long.
A support bar (stabilizer bar) ties the top of a fixed panel to a wall or ceiling so it cannot flex when the door closes. Connectors join the bar to glass at 90°, 135° or 180°.
PVC seals close the gaps at the bottom of the door and along the edges. Magnetic seals pull the door shut against a fixed panel.
For sliding showers the kit changes: rollers, a top track, stoppers, a floor guide and a flush handle replace hinges. We supply full sliding systems.
Kort antwoord: a frameless shower with one door and one fixed panel needs 2 hinges, 4 glass clamps (or a U-channel), 1 handle, 1 support bar and a set of seals. The plan views and table below show the typical kit for each common layout.
| Layout | Glas | Scharnieren | Glass clamps | Handvat | Support bar | Seals |
|---|---|---|---|---|---|---|
| 1 · Door only (alcove) | 1 door | 2 × wall-to-glass 90° | — | 1 pull handle or knob | — | Bottom sweep + 2 side seals |
| 2 · Door + inline panel | 1 door, 1 panel | 2 × wall-to-glass 90° (or 2 × glass-to-glass 180° on the panel) | 2 wall + 2 floor, or U-channel | 1 | 1 × glass-to-wall | Bottom sweep, 180° seal, side seal |
| 3 · Door + two panels | 1 door, 2 panels | 2 × glass-to-glass 180° | 4 wall + 4 floor, or U-channel | 1 | 1 × wall-to-wall with 2 glass connectors | Bottom sweep, 2 × 180° seals |
| 4 · Corner (door + return) | 1 door, 1 return panel | 2 × glass-to-glass 90° | 2 wall + 2 floor | 1 | 1 recommended | Bottom sweep, 90° seal, side seal |
| 5 · Neo-angle | 1 door, 2 panels | 2 × glass-to-glass 135° | 4 wall + 4 floor | 1 | 1 recommended | Bottom sweep, 2 × 135° seals |
| 6 · Bath screen (fixed) | 1 panel | — | 2–3 wall clamps; clamps with base or U-channel on the tub edge | — | 1 × glass-to-wall | Bottom seal |
| 7 · Sliding | 1 door, 1 panel | Roller set, top track, stoppers, floor guide, flush handle and seals. See sliding shower door hardware. | ||||
Send your layout sketch with glass sizes. We return a kit list with part numbers, quantities and hole positions for the glass processor.
Order every part in a kit for the same glass thickness. Tempered glass weighs about 2,5 kg per m² per millimeter, so 10 mm glass weighs 25 kg/m² and 12 mm glass 30 kg/m².
| Onderdeel | 8 mm glas | 10 mm glas | 12 mm glas | Note |
|---|---|---|---|---|
| Shower hinges | Ja | Ja | Ja | Long heavy-duty hinges for 10–12 mm doors |
| Glass clamps | Ja | Ja | Ja | Some models up to 14 mm |
| Handles & knobs | Ja | Ja | Ja | Screw length set to glass thickness |
| Support bar connectors | By model | Ja | Ja | Most connectors are made for 10–12 mm glass |
| Standard PVC seals | Ja | Ja | Ja | 6–12 mm profiles |
| Magnetic seals | Ja | Ja | Ja | 8–12 mm profiles |
| Sliding systems | Ja | Ja | Heavy-duty rollers | 30 × 10 mm kits for 8–10 mm; heavy-duty rollers for 10–12 mm |
| Glass weight | 20 kg/m² | 25 kg/m² | 30 kg/m² | A 900 × 2000 mm door: 29 / 45 / 54 kg |
A fixed parts list for each common layout, packed as one carton per shower with your label and barcode. Suited to distributors, hardware wholesalers and online sellers who stock ready-to-sell sets.
A parts list built from your drawings for a hotel, apartment or villa project, packed and labeled per bathroom or per unit so the site team installs without sorting parts. Suited to contractors and developers.
Hinges, clamps, handles, support bars and seals packed by item in cartons. Suited to shower enclosure factories and glass processors who assemble their own kits.
| Buyer | Usually orders |
|---|---|
| Hardware distributor / wholesaler | Standard kits in 2–3 best-selling finishes, private-label boxes |
| Shower enclosure manufacturer | Bulk hinges and clamps to one hole standard, custom finishes |
| Glass processor / fabricator | Components matched to their drilling templates |
| Contractor / developer | Project kits packed per bathroom, one finish for the whole project |
| Brand owner (OEM) | Private molds, logo engraving, branded kit packaging |
A mixed kit from several suppliers rarely matches: a "black" hinge and a "black" handle can differ in shade and gloss. Because HIPAD makes hinges, clamps, handles, support bars and sliding fittings itself, we match the finish across every part, so the whole kit is one color.
Matte black is also available across hinges, clamps, handles and sliding kits. Other PVD colors can be developed for private-label collections.
| Materiaal | Het meest geschikt voor |
|---|---|
| Roestvrij staal 304 | Most showers: homes, hotels, humid climates |
| Stainless steel 201 | Budget kits for dry, ventilated bathrooms |
| Brass | Premium gold, rose gold and bronze kits |
| Zinklegering | Large decorative bodies at lower cost |
| 316 stainless | Coastal, pool and spa projects, on request |
Keep one material across a kit so the finish ages evenly. Material documents and test reports are available per model.
De installatie moet worden uitgevoerd door een gekwalificeerde glazenmaker.
| Mistake | How to avoid it |
|---|---|
| Hinge angle does not match the layout | Use wall-to-glass for walls, 180° for inline panels, 90° for corners, 135° for neo-angle |
| No support bar on a panel carrying a door | Add a support bar whenever a door hangs from glass or a panel edge is free |
| Glass holes do not fit the hardware | Send the hardware drawing to the glass processor before tempering |
| Seals for the wrong glass thickness | Order seals for the same thickness as the hinges and clamps |
| Finishes differ between parts | Buy the whole kit from one factory in one finish |
| 201 used in a wet coastal bathroom | Choose 304, or 316 near the sea and pools |
HIPAD is a manufacturer, not a trading middleman. We started in 2000 with bearings and precision motion parts, and in 2020 we added stainless steel handles, glass clamps, shower fittings and railing. Hinges, clamps, handles and sliding fittings are produced, inspected and packed under one roof, so a complete kit ships from one factory in one finish.
Incoming materials, in-process parts and finished components are inspected by our in-house QC team, and kits are checked for part count and fit before packing. SGS or BV third-party inspection is available. HIPAD is ISO 9001 gecertificeerd, en de betreffende producten dragen CE, GS en CSA C-UL certificering. Certificaten voor een specifiek model zijn op aanvraag verkrijgbaar.
| 1. Layout & drawings | Send layouts, glass sizes, finish and quantities |
|---|---|
| 2. Kit list & samples | Kit list with drawings · samples in 5–7 days |
| 3. Productie | 20–25 working days · MOQ 1000 pcs per item |
| 4. Verzending | FOB Qingdao or any China port · 30% deposit, 70% before shipment |
| Term | Betekenis | Ook wel genoemd |
|---|---|---|
| Shower door hardware kit | All fittings for one frameless shower | Shower hardware set, shower system, shower enclosure kit, herrajes para mampara |
| Inline shower | Door and panels in one straight line | Alcove shower, front-only shower |
| Return panel | Fixed side panel at 90° to the front | Side panel, return |
| Neo-hoekdouche | Door between two panels at 135° | Diamond shower, angled shower |
| Support bar | Bar that holds the top of a panel to a wall or ceiling | Stabilizer bar, brace, header bar |
| Bottom sweep | Seal on the bottom edge of the door | Drip rail, door sweep |
| BOM | List of every part and quantity in a kit | Bill of materials, kit list |
A typical kit includes two shower hinges, glass clamps for each fixed panel (or a U-channel), a pull handle or knob, a support bar with connectors, and seals for the bottom and sides of the door. The exact contents depend on the layout and glass thickness.
For a door up to 900 × 2000 mm in 10 mm glass with one inline panel, you need 2 hinges, 4 glass clamps (2 on the wall, 2 on the floor) or a U-channel, 1 handle, 1 support bar and a set of seals including a bottom sweep and a 180° seal.
Yes. HIPAD makes hinges, clamps, handles, support bars and sliding fittings itself and matches the finish across all parts, so the whole kit is one color. Ten bathroom finishes are available, plus matte black and custom PVD colors.
Both. We supply standard layout kits packed per shower, project kits packed per bathroom, and bulk components for shower enclosure factories and glass processors that assemble their own sets.
HIPAD kits fit 8–12 mm tempered glass. Every part in a kit is chosen for the same thickness. Heavy-duty hinges and rollers are recommended for 10–12 mm doors.
Yes. We offer logo engraving or printing on the hardware, private-label kit boxes, labels and barcodes. Logo and packaging customization is available even for small quantities.
The standard MOQ is 1000 pcs per item. For mixed kits and projects the quantity depends on the layouts and finishes, so tell us your needs and we will confirm. Samples take 5–7 days and production 20–25 working days.
HIPAD is a manufacturer founded in 2000 in Qingdao, China, with in-house tooling, 2000+ mold sets, production and QC. Qingdao Hipad International Trade Co., Ltd. handles export.
HIPAD is ISO 9001 certified. Applicable products carry CE, GS and CSA C-UL certification, and SGS or BV third-party inspection is available. Ask for the certificate that covers the models in your kit.
A hardware factory since 2000, supplying shower hardware kits and components to distributors, shower enclosure makers, glass processors and contractors in 60+ countries. Our commitment includes:
Tell us your layouts, glass thickness, finish and quantities. We reply within 24 hours with a kit list and a factory price.
Wij antwoorden binnen 24 uur. Neem voor dringende aanvragen contact met ons op via WhatsApp/WeChat op +86 137 9191 8989 of bel rechtstreeks naar hetzelfde nummer.
*Wij behandelen uw gegevens vertrouwelijk en beschermen alle informatie.
Wij gebruiken uw gegevens uitsluitend om op uw aanvraag te reageren en sturen nooit ongevraagde e-mails of promotionele berichten.
Glasklemmen
Beslag voor schuifdeuren in de douche